iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly Owners Q&AiFly Owners Q&AADSB-In clutterADSB-In clutter
Previous
 
Next
New Post
8/7/2019 6:02 PM
 
More and more aircraft are ADSB equipped. It’s leading to more targets on my screen, making it harder to see the underlying map. Is there a way to screen (block) the ADSB-In data such that I only see aircraft under 10,000 ft or some self set altitude?
 
New Post
8/7/2019 8:05 PM
 

I have spoken with the FAA folks at a few of the gatherings (S n F, AOPA, OSH ) about this very scenario. We discussed the fact that when 2020 rolls around, your display in populated airspaces will be extremely cluttered, and will obscure the underlying data. They totally agree that it very well could cause problems with “eyes inside the cockpit” instead of looking outside. It’s amazing how many planes are flying near you, but before you had ads-b you thought you were the only plane flying that day. 

Now you know what ATC sees. But then, they’re not flying the plane at the same time. 

 
New Post
8/7/2019 10:52 PM
 
Perfect description of the problem. I grew up flying at Hanscom AFB near Boston. Very crowded and busy airspace. I’m in the Midwest now, thinking that if I’m in New England maybe paper charts again. Fore flight has an altitude screen capability I’m told, I’d be looking at it if I flew back east or California AND iFly didn’t come up with something similar.
 
New Post
8/8/2019 7:27 AM
 

I’m not quite sure what you mean about an altitude screen, but for your info, iFly does show your altitude in both agl and asl if you add those instruments. Any gps should show your altitude. It will also display the altitude of another target with ads-b out. Tap the target and it will show details (altitude, direction, speed). 

 
New Post
8/8/2019 9:00 AM
 

To the OP's original issue: set the thresholds you want to get less info.  (Setup | Alerts & Warnings | Traffic Alerts)


Powrachute PC 2000; Aventura II; Cherokee 180
 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly Owners Q&AiFly Owners Q&AADSB-In clutterADSB-In clutter