iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsADS-B Discussio...ADS-B Discussio...Flight ID displayFlight ID display
Previous
 
Next
New Post
5/26/2020 10:44 AM
 

Operating with a Stratux unit, latest version. Works great but would like to display the Flt ID field(aircraft identifier) along with the relative altitude of each aircraft displayed (now it just displays relative altitude.).  I know you can tap on each aircraft to bring up the ADSB info box but thats a pain when looking for a particular aircraft.  Is there an option to display flight ID by the displayed aircraft?

 

Tom

 
New Post
5/27/2020 6:58 AM
 

Tom,

I think I understand your question...

If you zoom in close enough, you will get the flight ID. It is not displayed on every perspective.

The developers here can explain why, but sometimes I seek the same info and simply zoom in to find the tail numbers (if they are available).  Many are not displayed due to not having ADSB out or have privacy filters installed already.

Mike N714AJ

 
New Post
5/27/2020 8:50 AM
 

Thanks Mike.  I tried that in my house here and it seems to work well.  I'm a newby to Ifly and appreciate the "hand-holding".  I'll try it on my next flight and see how well it works.

 
New Post
5/27/2020 9:39 AM
 

That's right, and also if you click on the traffic it'll pull up a little more info - tail number etc.

if they have a privacy filter on for some reason it will come back as BLOCKED

 
New Post
5/27/2020 12:15 PM
 

Also, many aircraft with ADSB out are not displayed consistently--especially those with 978 UAT transmitters. And altitude is always a factor, too.  Low = invisible (but not to the FAA, according to the FAA).

 
Previous
 
Next
HomeHomeDiscussionsDiscussionsADS-B Discussio...ADS-B Discussio...Flight ID displayFlight ID display