Two ADSB Devices - Configuration Question

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

ADS-B Discussio...

Two ADSB Devices - Configuration Question

11/21/2019 4:25 PM

Steve

Joined: 11/15/2019

Posts: 63

Two ADSB Devices - Configuration Question

I have two ADSB devices in my Long-Ez. The first one is an iLevil AW3 (with AHRS and pitot/static inputs). The second one is a uAvionix Echo In/Out transceiver. My plan is to connect the iLevil to the 740b tablet (via WIFI) so I can utilize the synthetic vision option. Then, connect the uAvionix Echo to an iPad running the IflyGPS app (via a separate WIFI connection) for the sectional chart

1) When connecting an iLevil AW3 (with AHRS), what device should I check from the menu of wireless devices Menu>About>Connected Devices>Wireless Devices? I see that there are two choices.

2) In the same menu heirarchy as questions #1, I do not see a choice for the uAvionix Echo. Will that be forthcoming in the next software release?

Thanks,

Steve

11/21/2019 4:47 PM

Cobra

Joined: 4/20/2011

Posts: 2602

Re: Two ADSB Devices - Configuration Question Modified By Cobra on 11/21/2019 4:49:12 PM

Hopefully an iFly rep or someone with a uAvionix device will pipe up soon, but until then, here's the advice I'd give for any device not explicitly listed: First, try Auto-detect. If that doesn't work, try Stratux.

You could also try calling Adventure Pilot and talking to customer service: (214) 585-0444.

Page 1 of 1

Home

Discussions

ADS-B Discussio...

Two ADSB Devices - Configuration Question

iFly GPS Forum

Adventure Pilot LLC