Cloud bases shown on vertical profile - iFly Wish-List

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly Wish-ListiFly Wish-ListCloud bases shown on vertical profileCloud bases shown on vertical profile
Previous
 
Next
New Post
2/18/2013 8:22 PM
 

The vertical profile is very helpful for showing the intended flight path in relation to obstacles and airspaces ahead. How sweet would it be if it also depicted clouds and visibilities when an ADS-B receiver is available? My idea is this: for any AWOS within (5? 10? Pilot selectable?) miles laterally of the flight path, show a line at reported cloud bases. Scattered clouds could be a scattered dashed line; broken clouds could be closer dashes; and an overcast layer could be a solid line. These lines could be (5? 10?) miles wide, centered over the reporting station. At the bottom in the "green" area, a number (also centered on the reporting station) could depict the reported visibility. Additionally, a second number in paranthesis could indicate how far the reporting station is from the flight path. For instance, " 7 (4L) " would mean that 7 mile visibility is being reported 4 miles LEFT of the flight line. If this is implimented, a pilot can see on one screen obstacles, airspace, clouds, and visibility ahead, and maybe even spot wx trends as the flight progresses. I think this would be a great cockpit asset whether flying IFR or VFR. To update an old saying, "a picture is worth a thousand finger taps".


Jeff Nokomis Clark, Mooney M20G, iFly app on ASUS ZenPad Z8s, ASUS ZenFone AR, ASUS Windows 10 tablet, Stratux ADS-B w AHRS
 
New Post
2/19/2013 10:19 AM
 

Jeff,

That is a neat idea. I think it would actually be easier than that. We have the Metars if you perform a WX update or use a ADS-B receiver. The sky condition and cloud levels are in those meters. At that point it would just be critical to keep the iFly Weather updated as frequently as possible or use an ADS-B.

We can receive data from an AWOS on the iFly, it does not receive frequencies into it. So in-air, the trick is to keep data updated and that would have to come from an ADS-B receiver or Wi-Fi update. XM is on our wishlist and that might be an option in the future as well. I hope this helps. Great idea and I've posted it to the Wishlist.


Shane Woodson
Vice President | Adventure Pilot LLC.
 
New Post
2/19/2013 11:09 AM
 

You lost me a little bit on the frequencies - I think you're referring to the frequency of the METAR updates. I DO have an ADS-B reciever (SkyRadar L) and I can get the current METARS by panning the map in weather mode, tapping the airport symbol, memorizing the visibility and cloud cover, closing the box, panning the map, tapping the next airport along the route, and repeating. So in a minute or two depending on turbulence and pilot workload, I can have a mental picture of the clouds and visibilities ahead of me. Since this data is already available to the iFly via the SkyRadar (in flight) or WX update (flight planning), it would be nice to have it depicted on the vertical profile. Sure, the data may be old, just like the NEXRAD. The iFly notifies me when I'm outside of ADS-B coverage, so I would KNOW in that case that I'm no longer receiving updates. And since METARS are updated hourly unless there's a significent change, the depiction could expire after 60 minutes. Heck, if we really want to fancy it up we can also put a golden arrow at the most favorable altitude for the direction of flight, based on the forecast winds aloft.

An XM solution would hold no value to me personally, as my weatherwagon is hitched to ADS-B.

Thanks for listening!


Jeff Nokomis Clark, Mooney M20G, iFly app on ASUS ZenPad Z8s, ASUS ZenFone AR, ASUS Windows 10 tablet, Stratux ADS-B w AHRS
 
New Post
2/19/2013 11:26 AM
 

Sorry about that. Correct, I was talking about the AWOS Frequency. The AWOS station is really worthless without a frequency, internet connection or an ADS-B receiver to retrieve it's data. The METAR is just the Raw data from that AWOS station.

If you have a SkyRadar, then you are getting METARs in air. That is really what is needed to show the cloud bases on the vertical profile. I completely agree, having these Cloud bases, possibly Rain or Thunderstorms in the area and even the favorable flight level would be very nice. They are already on our development wishlist. I'll note this request and move it up the list.

Sorry for any confusion.


Shane Woodson
Vice President | Adventure Pilot LLC.
 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly Wish-ListiFly Wish-ListCloud bases shown on vertical profileCloud bases shown on vertical profile