Navworx ADS600-EXP - iFly Owners Q&A

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

iFly Owners Q&A

Navworx ADS600-EXP

7/11/2015 11:16 PM

Robert Cartwright

Joined: 1/10/2013

Posts: 72

Re: Navworx ADS600-EXP

Did you go into the networks section and connect the wifi prior to going to the iFly GPS functions? I'm no expert, but it seems I need to do that on my 740 every time I update it. Bob

7/12/2015 11:31 AM

Rich Harrison

Joined: 4/21/2012

Posts: 190

Re: Navworx ADS600-EXP

Yes, when I turned on the iFly, I first set up the WiFi before starting the iFly GPS S/W. Thanks

7/13/2015 12:03 PM

Shane

Joined: 4/21/2010

Posts: 1709

Re: Navworx ADS600-EXP

Rich,

Can you call our support team at 888-200-5129? We need to do some troubleshooting and get your Software and Firmware versions. We have 740's and the ADS600-EXP here in the office and they connect and work just fine. Give us a call, we'll get you running.

Shane Woodson
Vice President | Adventure Pilot LLC.

7/14/2015 10:41 PM

Rich Harrison

Joined: 4/21/2012

Posts: 190

Re: Navworx ADS600-EXP

Thanks Shane. It will likely be next week before I can sneak away from work and get out to the hangar during your shop's business hours. I upgraded the Navworx to S/W version 4.04, and I think the iFly is on 9.1.28 if that helps.

8/6/2015 9:34 PM

Rich Harrison

Joined: 4/21/2012

Posts: 190

Re: Navworx ADS600-EXP

I am happy to say I got the NavWorx to talk to the iFly 720. The NavWorx was issuing an IP address via DHCP, and this through me off. The iFly seemed to be connected, but did not recognize the NavWorx. I finely read a document that said how to connect the NavWorx to an iPad or iPhone with Wing-X S/W. In there it said to set up your iPad with a static IP. I did that on the iFly, changed the setting under "Connected Devices to "NavWorx Static IP" and everything started working. Next the fight test...

Page 3 of 5

iFly GPS Forum

Adventure Pilot LLC