iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly Owners Q&AiFly Owners Q&A740 Audio Output 740 Audio Output
Previous
 
Next
New Post
4/17/2020 3:36 PM
 

Is there info on the 740's audio output circuit impedance? I finally got around to plugging my 740's AUX output into the intercom (600 ohm input impedance), and it worked. Unfortunately, it reduced the volume of the other three devices also plugged into the intercom to the point that I had to unplug the 740 audio in order to hear the others. All four inputs have a 500 ohm resistor in series, and the other three devices play nice together. I'd like to hear the 740, too, but need advice on how best to keep it from damping the other inputs.

 
New Post
4/20/2020 3:23 PM
 

Just checking to be sure that  36 π (pi) should be  36 Ω  (omega) on page 29 of the 740 Extra Features Manual

If that's so, then:

--the manual needs correcting:  Change pi to omega, or write out "Ohms."

--and I need assurance that the 740's audio output impedance really is 36 Ohms. (36 Ohms seems an unusual impedance for an audio output circuit.)

 

 
New Post
4/21/2020 10:37 AM
 

Thanks for reporting this, it's on our to do list for the next release of the manual. 

 
New Post
4/21/2020 11:57 AM
 
Brolin McKay wrote:

Thanks for reporting this, it's on our to do list for the next release of the manual. 

So, is the impedance really 36 Ohms?  That's what I'm mainly interested in, as I have a serious impedance mis-match between the iFly 740 and the other three audio sources I'm putting into the intercom.

 
New Post
4/21/2020 12:55 PM
 

Hi Don,

Honestly this is the first time in all these years I've been asked this question.  The doc is specifying the Ohms of the speaker, so this is not necessarially the output impedance.  I've submitted your question to our hardware team, will let you know what I learn.

-Walter


Walter Boyd
President, Adventure Pilot
 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly Owners Q&AiFly Owners Q&A740 Audio Output 740 Audio Output