Traffic - ADS-B Discussions

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

ADS-B Discussio...

Traffic

10/29/2021 3:57 PM

John Flick

Joined: 4/27/2015

Posts: 1

Traffic

Is there a way to see only traffic on the screen

10/29/2021 5:43 PM

Cobra

Joined: 4/20/2011

Posts: 2602

Re: Traffic Modified By Cobra on 10/29/2021 5:45:43 PM

Could you be more specific about what you're asking for? Surely you do not want a completely blank screen with traffic overlaid on it...?

iFly has many ways to configure the screen to show more or less information. There is probably a way to do what you want, if you can describe what you want more clearly.

10/29/2021 6:44 PM

Michael Marra

Joined: 3/26/2014

Posts: 706

Re: Traffic

There is a way to take the sectional OFF so you just MAINLY see the traffic and some key aviation features. If you are looking for simplicity, that may be the way to go for you.

Mike N714AJ

12/18/2021 11:41 AM

Bayne

Joined: 11/3/2021

Posts: 3

Re: Traffic

i use the UAvionix Ping USB dual band traffic ADSB in unit attached to my !fly740B. It receives traffic only and displays the traffic on your map screen. it gets power from the Ifly740b USB port and communicates with the Ifly via wifi. No weather.

12/20/2021 2:13 PM

Dennis

Joined: 9/6/2011

Posts: 86

Re: Traffic

Try the vector map mode. This eliminates a lot of the sectional clutter and still provides all the nav you need. Look under maps and check vector rather than sec.

Page 1 of 2

1

iFly GPS Forum

Adventure Pilot LLC