ifly 720 issue - ADS-B Discussions

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

ADS-B Discussio...

ifly 720 issue

1/4/2020 7:49 PM

Leo Hollis

Joined: 6/19/2013

Posts: 2

ifly 720 issue

Hi, the last 2 flights I have done with the Stratus 3 for ADSB in have worked awesome in the air. My problem is that on start up the ifly doesn't show me on the airport diagram, just the sectional. Same thing when I landed today. PVU to SLC. Any ideas to fix the issue? Worked fine before the ADSB was connected to the 720.

1/7/2020 3:34 PM

Cobra

Joined: 4/20/2011

Posts: 2602

Re: ifly 720 issue Modified By Cobra on 1/7/2020 3:35:25 PM

Have you confirmed that AutoTaxi is still enabled in the iFly settings? Menu > Setup > Map Settings > Enable Auto Taxi - checked. (There are some options under that to specify zoom level--if you have a specific zoom level selected, try changing it to Default/Dynamic. I think you have to uncheck/recheck AutoTaxi to change the zoom setting.)

Page 1 of 1

iFly GPS Forum

Adventure Pilot LLC