iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsADS-B Discussio...ADS-B Discussio...Can’t receive traffic or wx using ping ads-bCan’t receive traffic or wx using ping ads-b
Previous
 
Next
New Post
6/15/2018 9:12 PM
 
Using Ping ADS-B receiver with I-fly 740. Not showing traffic or wx. 740 is connected in settings. Any suggestions?
 
New Post
6/15/2018 9:53 PM
 
In IFly, click on Map Mode - then put check mark for what you want to see.
 
New Post
7/5/2018 10:12 AM
 

John, did you get your issue solved? If so, how do you like the Ping so far?

Tom Murrell

 
New Post
8/11/2018 8:01 PM
 

I have been using Ping with my 720 for well over a year in my two airplanes.  Works good, except in my plane with a Narco Mark12D, I get radio noise from it on some frequencies.  I have not noticed that in my other plane with King radios (155 & 170B).  I have had this in the past with other stuff in the plane with the Narco, the Mark 12D has given me good service life but it does not seem as well shielded as the Kings.

 
New Post
8/13/2018 12:17 PM
 

deleted due to user error - wrong thread!

 
Previous
 
Next
HomeHomeDiscussionsDiscussionsADS-B Discussio...ADS-B Discussio...Can’t receive traffic or wx using ping ads-bCan’t receive traffic or wx using ping ads-b