iFly GPS Forum

I just finished the install of my Navworx ADS600-B. It is working in all aspects except the Samsung Galaxy Tab Pro does not communicate properly with the Navworx Wifi adapter. Although the Tab Pro has acquired a strong wifi signal and had not problem acquiring the NavWorx IP address, the Tab Pro is not getting any data from the ADS600-B. I have removed all antivirus software but still am not getting any weather data. Has anyone had this problem and found a way to get data to a Tab Pro from a newer Navworx ADS600-B. iFly is working on this problem but have they have not found the problem or a way to solve it.

No I haven't tried another tablet. I could do that but not sure what that would accomplish. The trouble is either the Navworx is not sending data or my tablet is not able to capture the data. Another tablet might work but that would only tell me that the Navworx is transmitting data. But it won't get me any closer to using my Samsung Tab Pro 8.4 in which I have quite a bit invested. As such my original question remains: Has anyone with a Samsung Tab Pro using Kitkat 4.4.2 been able to get data from the Navworx ADS600-B? If so, what steps if any did you take to get it to work?

Vern, hi, and thank you for reporting this issue.

Please do the following for me, so that I can help you out.

1. Start iFly.
2. Menu => About => Connected Devices => Wireless Device => Enable Logger (check the box).
3. Fly your flight, with ADSB Device receiving data from the towers.
4. Upon landing, restart iFly, and then do: Menu => About => Send Bug Report => Select Log => select "AdsbRaw.bin"

From this AdsbRaw.bin file, I can reproduce your entire data stream and tell you what is happening.

I assume you are testing this in the air. Often Adsb devices don't get reception until airborn since the towers are focusing their signal upwards... I am not positve of this, it's just what I've heard from others.