iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly GPS for An...iFly GPS for An...Approach Plate Fixes OffsetApproach Plate Fixes Offset
Previous
 
Next
New Post
6/18/2020 9:03 AM
 

Hi, 

I am testing it and really liking it so far. Two different tablets show fixes on approach plates that noticeably differ from the same fix on the charts. Was using Vector mode but discrepancy also shows on IFR Low. Pictures too big to upload but compare Rozzy on LHM RNAV 33 with the charts. The whole FAC is offset.  

Clarence Binninger

 

 

 
New Post
6/18/2020 9:31 AM
 

When I view that approach, it appears to be correct in Low IFR but not on the plate.  If you overlay the plate on the Low IFR chart and turn the opacity on the plate down you can see the discrepency between the two.  It's like the plate is not quite georeferenced correctly.


CHAD A. BAKER | PA-28 140 | Building a Cozy IV | Life is Short, Live Your Dream and Share Your Passion!
 
New Post
6/22/2020 3:38 PM
 

I georef these, i'll look at it and get it fixed on the next round of data.

 
New Post
7/2/2020 10:52 AM
 

Great catch - fixed.

 
New Post
7/18/2020 12:38 PM
 

Thank you for the fast response. I haven't had a chance to test it yet. The defaul Vector fixes and names disappeared from my Lenovo tablet but not my phone. This morning I emailed a bug report about this suspecting something unique about my tablet.

Clarence 

 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly GPS for An...iFly GPS for An...Approach Plate Fixes OffsetApproach Plate Fixes Offset