iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...Ping ADS-B Receiver/USB Connection QuestionPing ADS-B Receiver/USB Connection Question
Previous
 
Next
New Post
10/22/2017 3:06 PM
 
John Austin
10th Level Poster


John Austin's Avatar

Joined: 4/13/2013
Posts: 150

I am presently using my iFly 740's USB port to transmit NMEA data to my fuel computer.  I am interested in the Ping ADS-B Receiver for iFly due to it's compact size.  However, I note it requires a USB connection.

  1. Is the USB connection simply for power, or is the PIng not wifi-enabled and needs the USB connection to transmit data to the iFly?
  2. If the USB connection IS required for data, can the iFly 740's single USB port be split with a splitter cable or hub so that I can continue to transmit NMEA data to my fuel computer AND receive data from the Ping ADS-B?

Thanks,

John
 
New Post
10/23/2017 11:23 AM
 
John Austin
10th Level Poster


John Austin's Avatar

Joined: 4/13/2013
Posts: 150

Support answered my question - the Ping needs the USB for data transmission, so they recommended I go with the Stratux since it utilizes wifi.
 
 Page 1 of 1
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...Ping ADS-B Receiver/USB Connection QuestionPing ADS-B Receiver/USB Connection Question


Adventure Pilot LLC

1476 Industrial Blvd McKinney, TX 75069
info@iflyefb.com
M-F: 10:00am - 5:00pm CT
(214) 585-0444

© 2023 by Adventure Pilot : Terms Of Use : Privacy Statement