iFly GPS Forum

I have the IFly app on my iPad mini with the Stratux ads b "in" that I purchased the parts and built. I have only used the ads b a couple times and seemed to work just fine. I had traffic on my IFly screen and could tap on the triangle and get a lot of info and the stratux page showed gps connection and a list of traffic it has picked up. But now It's not showing traffic on the IFly map screen. Going back to the stratus page it is still picking up traffic and it's connected via WiFi and traffic and WX status show connected. But still no traffic showing on the IFly screen. I have gone through the IFly settings and traffic is enabled, nexrad is checked and meter/taf is checked. The lights on the stratux are not flashing and I shut it down with the shut down button on the stratux page. Has any one experienced this issue or is there away I can fix it? I thought about flashing the sd card but from what I read if the lights are not flashing indicating a problem don't mess with the card. Any help will be appreciated thank you!

Stratux can admittedly be very finnicky. 

In addition to what Cobra said, have you re-flashed your Stratux card?
Are you sure you're getting solid power to the device?
Are you sure you're connected to the wifi being emitted from the unit?
Are both antennas on snugly?

I know it sounds ridiculous, but those have all been recent fixes for folks who don't see traffic.

Brolin, thanks for your info. I have not flashed the card. I was told if the lights flash there is a software problem and it will need to be flashed. Both lights are solid showing no issue. And I have good positive power to the stratux unit. On the stratux page all information is showing that the stratux is working including seeing traffic. My iPad is connected to stratux WiFi but nothing is showing up on IFly. I will take it apart and check all antennas and make sure all connections are good. Also I will Flash the card and see what it does. Thank you for your help.