Mike,
We do have this on our wishlist. Another feature in the works is Auto Day / Night Mode. You would'nt have to switch back and forth, it would do it for you base on GPS location and sunrise and sunset. I have also recommended that the iFly default to full bright in Day Mode on power up, then the Auto Mode could correct if at night and/or the user can manually set to Night if Auto mode is not enabled. Boths ways should have your request resolved in the near future. Thanks for the great feedback. You are spot on and this is one reason many suddenly found it hard to see. Just brightening the Night Mode up does not remove the darkening layer we use for night mode. There is a substantial difference as you have noticed. Thanks again and have a great evening.