uAvionix ESX Interface - iFly General Discussions

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

iFly General Di...

uAvionix ESX Interface

6/22/2018 9:28 AM

Dave

Joined: 5/30/2015

Posts: 61

uAvionix ESX Interface

I'm seriously considering installing a uAvionix ESX transponder (https://www.uavionix.com/products/echoesx/) ADS-B out/ADS-B UAT In with an iFly 740B. The 740B is one of the supported products to display traffic, weather and AHRS which is great. The ESX is a mode S transponder so there is the need to be able to set the squawk code and other transponder functions. This control can be done via a supported EFIS or their own 2.25" control head. I do not have a supported EFIS so would need the control head or.......

iFly folks -- any thoughts on having the 740B control the transponder portion of the ESX?

https://www.uavionix.com/products/echoesx/

6/22/2018 11:57 AM

Walter

Joined: 7/8/2009

Posts: 2778

Re: uAvionix ESX Interface

We intend to be one of the "supported EFIS" systems, but have not yet received a spec for developing this. Once received, we should be able to estimate a release date for that capability.

-Walter

Walter Boyd
President, Adventure Pilot