Version 5 Released! - iFly General Discussions

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

iFly General Di...

Version 5 Released!

3/23/2011 8:47 AM

Walter

Joined: 7/8/2009

Posts: 2778

Re: Version 5 Released!

Tom Murrell wrote:

Pattern altitude appears to be 1000' AGL default.

Correct; if a specific pattern altitude is not identified we assume 1000' above airport altitude.

Walter Boyd
President, Adventure Pilot

3/23/2011 8:48 AM

Walter

Joined: 7/8/2009

Posts: 2778

Re: Version 5 Released!

Folks: This thread is getting a little bloated and hard to follow. If you have a specific question please feel free to start a new thread.

-Walter

Walter Boyd
President, Adventure Pilot

4/13/2011 4:32 PM

David

Joined: 1/3/2011

Posts: 521

Re: Version 5 Released!

Thanks Walter,

I have the USB hub installed, and both the multi-media output plus the NMEA output for the heading to the D/A converter are working just fine. Thanks for the tip about the hub! Any estimate when the update for the NMEA course sentence will be available for download?

Very nice to meet you at Sun 'n Fun,

David

C177RG: iFly 720, Stratux 978/1090 ADS-B in, AHRS, BMP, Stratus ESG ADS-B out. RV-3: 8" Samsung Tab A, Stratux 978/1090 ADS-B in, AHRS, BMP, Stratus ESG ADS-B out.

4/18/2011 10:42 AM

Walter

Joined: 7/8/2009

Posts: 2778

Re: Version 5 Released!

David, you can download 5.14 now. This should correct the NMEA problem - we have reports of several successful autopilot installations now.

Thanks!
Walter

Walter Boyd
President, Adventure Pilot

4/21/2011 11:51 AM

David

Joined: 1/3/2011

Posts: 521

Re: Version 5 Released!

Walter,

SW version 5.14 is now installed and both the heading and course functions of the NMEA output are working perfectly with my autopilot! Thanks again for the great product developement and support work.

David

C177RG: iFly 720, Stratux 978/1090 ADS-B in, AHRS, BMP, Stratus ESG ADS-B out. RV-3: 8" Samsung Tab A, Stratux 978/1090 ADS-B in, AHRS, BMP, Stratus ESG ADS-B out.

Page 7 of 8

...6

iFly GPS Forum

Adventure Pilot LLC