Vector mode - iFly General Discussions

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

iFly General Di...

Vector mode

8/14/2013 7:38 PM

Joined: 1/1/0001

Posts: 0

Re: Vector mode

One other thing I'd like to see in a new version (I have the 700) is 'available' system voltage. I happen to not have a charging system on my Champ and run off a auxilary battery. I works fine but it would nice to have voltage available for 'peace of mind'.Thanks!

Mike

8/14/2013 9:51 PM

Rich Harrison

Joined: 4/21/2012

Posts: 190

Re: Vector mode

I think this has been posted before, but a source (buss) voltage display would be great. If that could be added to the instrument displays (as an option) would be better. Then to have it flash red if the voltage drops below 13 volts with an alternator, or 11.5 volts on a generator or battery only system). Whoops, then there are the 28 volt systems to consider...

8/15/2013 12:07 PM

PA-22

Joined: 2/16/2011

Posts: 501

Re: Vector mode

Edward Geci wrote:

I am new to the 720. I fly in a airspace congested area. It would be nice if vector mode showed the airspace altitudes inside the rings.

Edward: Ths has been suggested before and is on AP's wishlist, in the meantime, you can simply tap the screen inside the blue shape of controlled airspeace, then select "Airspace Information" and it will be displayed in a pop-up box. It not a bad work-around for now. ====Ralph

Page 2 of 2

iFly GPS Forum

Adventure Pilot LLC