Self-Contained Stratux Build - iFly Pictures & Feedback

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

iFly Pictures &...

Self-Contained Stratux Build

8/4/2017 9:55 PM

Joined: 1/1/0001

Posts: 0

Re: Self-Contained Stratux Build

I ran it for 2 hours plugged in and it maxed out at 134 degrees F. When I unplugged it, the battery was still at 100 percent charge, so the PowerBoost 1000 is doing it's job. So, I guess I'll use it in the plane from now on unless it develops a problem or gets too hot, etc.

https://goo.gl/photos/U7hS6Sg6EqxxTP529

8/17/2017 5:04 PM

Joined: 1/1/0001

Posts: 0

Re: Self-Contained Stratux Build

Now that I got this finished and everything working well, I am going to abandon this project. I'm concerned the lithium ion battery may get too hot in the case with the Raspberry Pi, 2 SDR's, and the PowerBoost 1000. The last thing I need is an exploding battery in an airplane.

Page 2 of 2

Self-Contained Stratux Build

iFly GPS Forum

Adventure Pilot LLC