iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...OUR BIG ANNOUNCMENTOUR BIG ANNOUNCMENT
Previous
 
Next
New Post
9/7/2021 9:43 AM
 

The iLevil3/Levil AP

 
New Post
9/7/2021 10:42 AM
 

Hey Brolin,

Just to be clear... in order to have autopilot info from the EFB, I have to purchase a stand alone device for 1400.00? 

 

 
New Post
9/7/2021 3:31 PM
 

as for right now you can run NMEA output from iFly to your autopilot with either the Levil AP or iLevil3. 

 
New Post
9/7/2021 3:39 PM
 

Not much reason to do that... I am currently running serial data from the 740 directly to the Dynon HS34 that drives the Autopilot.

My question is this - Will I need to purchase additional hardware to be able to use the EFB with my Dynon autopilot?

 

 
New Post
9/7/2021 4:50 PM
 

The way that things are shaping-up the EFB will only talk to Ilevil for NMEA and I wouldn't be surprise

that the ilevil will only talk to the ilevil AP, leaving us that already have AutoPilots in a dark situation.

It's my humble opinion that a Win-Win situation would of been to send the NMEA from the EFB thru the

USB port like the 740b is doing, the code already exist on that platform so it could of just been imported

into the EFB....

Just my opinion......

 

 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...OUR BIG ANNOUNCMENTOUR BIG ANNOUNCMENT